Woodturning Accessories
|
The Lewin Center Finder.$20.00 1",1 1/8",1 1/4"X 8 |
Inserts Into The Face Plate To Mark The Bottom. |
|
Then Using A Jam Chuck And Tail Stock, |
Turn Out The Screw Holes And Form The Foot. |
|
The S Curved Tool Rest Seen Here Is For ThePower Matic 3520 Lathe Other Lathe Models Also Available. $95.00 |
This Is A Simple 1"X 8 TPI Face Plate $25.00. A Nut Welded to a Steel Plate. |
|
This Outboard Turning Platform Works Well With |
The Power Matic 3520 Lathe.$575.00 |
|
Low Profile Tool Holder.Adds 2" To The Bowl Diameter. Old Style Shown For Comparison. Fits Power Matic, Woodfast, And Oliver Lathes. $185.00 |
Add Functionality To Your Lathe With This Sanding Platform. It Will Fit Any 1" Tool Holder. Make Your Own Sanding Disk Out Of Plywood And An Extra Face Plate.$45.00 |
|
|
Delta Shaper with 1',3/4"and 1/2" spindles. 3hp. 3ph. motor $675.00. Excellent Condition |
-Home